|
Here you will find Clutches, Chains, Hubs, Sprockets and other components to
beef up the acceleration and strength of your 120 Mini Snowmobile.
120 PERFORMANCE CLUTCH / SPEED GEARING KIT
THE STOCK 120'S ARE JUST WAY TOO SLOW! If you are going racing or just want
all out improved performance, this is the way to go. It includes a new High
Performance Racing Clutch, Quick Change Sprocket Hub, Aluminum 44T Drive
Sprocket and a High Quality 35 pitch chain. The clutch is a high performance
unit with 4 shoes and easy change springs. It also features a higher engagement
rpm for better take-offs. With the smaller 35 pitch chain we have found that
there is far less less rolling resistance
than a stock 420 chain and gears have. This reduced resistance results in better
performance along with reduced chain wear and noise. These kits are quick and
easy to install with the included instructions.
| Description |
SKU # |
Price |
|
| Polaris XCR XC120 Clutch-Gearing Kit |
POLCLUTCH |
$199.95 |
|
| Ski-Doo Mini-Z, Rev Clutch-Gearing Kit |
SKICLUTCH |
$199.95 |
|
| Arctic Cat Z-120 ZR120 Clutch-Gearing
Kit |
CATCLUTCH |
$199.95 |
|
NEW!!
#35
Chain & Sprocket Conversion Kit for Stock Clutches
AFFORDABLE ALTERNATIVE!
Now
you can get all the benefits of a #35 chain system without having to put on a
new clutch. If you are not racing then you may not need all the
features of the race clutch, just more top speed! This easy to install kit will
set you up right. Includes a new #35 clutch drum to swap out with your stock unit,
the quick change rear hub, aluminum sprocket and a #35 chain. The engagement rpm
will be the same as stock, but the new revised taller gear ratio will deliver
several more mph than stock on top end. Works on all years of Ski-Doo, Polaris and
Arctic Cat 120 models.
| Description |
SKU # |
Price |
|
|
Polaris #35 Chain Conversion Kit
|
POL35KIT |
$139.95 |
|
| Ski-Doo #35 Chain Conversion Kit |
SKI-DOO35KIT |
$139.95 |
|
| Arctic Cat #35 Chain Conversion Kit |
CAT35KIT |
$139.95 |
|
 #35 Chain Aluminum Gears
We carry gears for #35 chain in all sizes from from 37T to 54T teeth in 1
tooth increments. We find that it's best to have a few on hand at the track to
adjust the speed as needed with changing track conditions. Please specify # of
teeth desired at checkout.
| Description |
SKU # |
Price |
|
| #35 Aluminum Gears |
ALGEAR |
$26.95 |
|
 XTREME
#35 RACING CHAIN
This is the strongest #35 chain on the market. If you are a serious racer or
having problems with worn out chains, then give this chain a try. Features extra
heavy duty rollers with gold side plates. It is a "space chain" which has more
space between the side plates and the rollers for reduced drag.
| Description |
SKU # |
Price |
|
| #35 XTREME CHAIN |
XCHAIN |
$34.95 |
|
 H.D.
CHAIN TENSIONER FOR MINI-Z AND ARCTIC CATThe stock spring loaded
tensioners are not very good and often don't last very long either. This
tensioner bolts to the side of the tunnel and has a 35 pitch roller bearing
supported sprocket which is easily adjusted to the correct chain tension with
just one nut. Set it and forget it!
| Description |
SKU # |
Price |
|
| HD #35 Chain
Tensioner |
HDCHT35 |
$85.95 |
|
| 
